The XS8302,XM8302M is an ultra-low EMI, filter free, single channel Class D audio power amplifier. When the operating voltage is 5V, the maximum drive power is 5W (VDD=5.5V,2ΩBTL load, THD<10%), and the total harmonic distortion noise in the audio range is less than 1% (20Hz ~ 20KHz).
XS8302,XM8302M application circuit is simple, only a few peripheral devices; XS8302,XM8302M outputs do not require external coupling capacitors or up-lift capacitors and buffering networks;
XS8302,XM8302M with SOP8/MSOP8 package, especially suitable for small volume, small weight portable system;
Ultra-low EMI, high efficiency, excellent sound quality
Class D single channel
VDD=5.5V,RL=2Ω,Po=5 W,THD+N≤10%
VDD=5V,RL=4Ω,Po=3W,THD+N≤10%
Wide operating voltage range 2.5V - 6.5V
Excellent on-off POP acoustic suppression
The XS8302 is packaged in SOP8/MSOP8
laptop
Desktop computer
megaphone
Bluetooth speaker
Note: The components in the above application diagram are described:
Ci: Straight capacitance, in 0.1µF or less, further eliminates clatter-pitting and noise coupled in from the input.
Cs: Power decoupling capacitor, use a sufficiently low ESR capacitor (less than 1µF), when VDD=5V, it is recommended to add another low ESR capacitor (not less than 10µF) to better filter out low frequency noise. The closer the decoupling capacitor is to the VDD pin, the better. Keep it within 1.5mm.
INBYP: The INBYP port outputs VDD/2 voltage and is grounded through a capacitor C B (1µF) for stability. If the PCB design needs to consider the compatibility with other products of the same type, the resistance R0 position can be reserved, and the 0 ohm resistance can be used when producing the patch. If you do not need to consider the compatibility with other products of the same type, you can remove the resistance R0 and directly short-circuit it.