As above, set CM[24] of the battery shield register to 0.
Summary: DVC1124 One of the ways to reduce the number of strings,
(1) The hardware is shorted as shown in Figure (1) above.
(2) On the software, set the number of sections that do not need to be collected for shielding as shown in Figure (2), otherwise this section will report undervoltage.
免责声明: 本文章转自其它平台,并不代表本站观点及立场。若有侵权或异议,请联系我们删除。谢谢! Disclaimer: This article is reproduced from other platforms and does not represent the views or positions of this website. If there is any infringement or objection, please contact us to delete it. thank you! |