CST118A Summary:
CST118A is a single channel DC brushed motor driver IC, suitable for electronic locks, electric toothbrushes, toys, consumer products, and other low-voltage or battery powered motion control products.
CST118A outputs a peak DC current of 2.5A and a continuous current of 1.8A, with a power supply operating range of 2V-6V.
CST118A has a set of PWM (INA-INB) inputs, low output resistance, and is packaged in SOP8.
CST118A Feature:
Single channel built-in power MOS full bridge driver
Working voltage range: 2V-6V
Drive forward, backward, stop and brake functions
Low on resistance: high side+low side (HS+LS=400mΩ)
Built in hysteresis heating effect overheat protection function
The maximum continuous output current can reach 1.8A, with a peak value of 2.5A
No need for large peripheral filtering capacitors, only small surface mount capacitors are needed
Adopting SOP-8 encapsulation format
CST118A Application:
CST118A Ordering Instructions:
Part No. | Package | Mark* | Tape/Reel |
CST118A | SOP8 | CST-LOGO-CST118A TXXXXXX | 4000PCS/卷 |
118A(中性标) | SOP8 | 118A XXXXXX | 4000PCS/卷 |
CST118A Typical schematic diagram:
CST118A Pin diagram and pin description:
Number | Name | IO | Pin Descripation | |
1 | NC | - | Hanging in the air | |
2 | INA | I | Combining INB to determine output status | |
3 | INB | I | Determine the output status based on INA | |
4 | VDD | P | Power Supply | |
5 | OUTB | O | Full bridge output B terminal | |
6 | NC | - | Suspended or grounded | |
7 | GND | P | land | |
8 | OUTA | O | Full bridge output A terminal |
CST118A Limit parameter: (Note1)
Symbol | Explain | Value | Company | |
Voltage | Power supply voltage (VDD) | 6.0 | V | |
Maximum continuous output current |
| 1.2 | A | |
Peak output current |
| 2 | A | |
Power waste | Pd | SOP8 | 0.96 | W |
Thermal resistance | ӨJA | SOP8 | 130 | oC/W |
TJ | Range of junction temperature | -40 to +150 | oC | |
TSTG | Storage temperature range | -40 to +150 | ||
TSDR | Welding temperature range | 260 |
Note 1. Absolute maximum rated value refers to the value at which the lifespan of the device may be damaged, which may cause permanent damage to the chip under absolute maximum rated conditions.
Symbol | Explain | Minimum value | Maximum value | Company |
VDD | Supply Voltage | 2.0 | 6 | V |
VI | Logic input voltage range | 0 | VDD | |
IOUT | Forward and reverse current | -1.8 | 1.8 | A |
CST118A Electrical Characteristics:
(Unless otherwise specified, TA=25 ℃, VCC=3V, RL=15Ω)
Parameter | Symbol | Test conditions | Minimum value | Typical values | Maximum value | Company | |
Whole | |||||||
ICCST | Turn off the current | INA=INB=GND | ━ | 0 | 10 | uA | |
ICC | 静态电流 | INA=H,INB=L INA=L,INB=H INA=H,INB=H | ━ | 0.3 | 1 | mA | |
Control input | |||||||
VINH | 高电平输入电压 |
| 2.0 | ━ | ━ | V | |
VINL | 低电平输入电压 |
| ━ | ━ | 0.8 | V | |
IINH | 高电平输入电流 | VIN = 3V |
| ━ | 5 | 20 | uA |
IINL | 低电平输入电流 | VIN = 0V |
| -1 | 0 | ━ | uA |
RIN | 下拉电阻 |
| ━ | 1.5 | ━ | MΩ | |
Drive | |||||||
RON | 输出导通阻抗 | IO = 200mA |
| 0.4 |
| Ω | |
RPLD | INA、INB内置下拉电阻 |
|
| 150 |
| kΩ |
CST118A内部框图:
CST118A输入/输出逻辑表:
输 入 | Output | Method | ||
INA | INB | OUTA | OUTB | |
L | L | Hi-Z | Hi-Z | Standby status |
H | L | H | L | Forward |
L | H | L | H | Back off |
H | H | L | L | 刹车 |
CST118A封装信息: