The ChipSourceTek-MXD60P110 is a high-performance P-channel enhanced power Mosfet whose outstanding electrical characteristics and wide range of applications make it the ideal choice for electronics designers when developing high-performance, high-reliability electronics.

1, ChipSourceTek-MXD60P110 basic features of efficiency, high reliability of electronic products when the ideal choice.

     ChipSourceTek-MXD60P110 is a P-channel enhanced mode Mosfet with VDS=-60V, ID=-60A, RDS(ON)(Typ.)=12mΩ@VGS=-10V, RDS(ON)(Typ.)=14.3mΩ@VGS=-4.5V. Available in TO-252 package. This product uses advanced trench technology with low on-resistance, low gate charge and gate voltage operation down to -4.5V. These features enable it to perform well in a variety of applications.

    Main parameter

1.     VDS：-60V

2.     ID：-60A

3. 

3.     RDS(ON)：The typical value is 12mΩ@VGS=-10V, and the typical value is 14.3mΩ@VGS=-4.5V

4.     encapsulation：TO-252 package

2, ChipSourceTek-MXD60P110 electrical performance

    The ChipSourceTek-MXD60P110 uses advanced grooving technology to deliver outstanding electrical performance. Its main electrical characteristics are as follows:

1.     igh power and current handling capabilities：With drain-source voltage up to 60V and drain current of 60A, the device is capable of handling high power loads.

2.    Low on-resistance：When VGS=-10V, the typical value of RDS(ON) is 12mΩ. For VGS=-4.5V, the typical value of RDS(ON) is 14.3mΩ. This allows the device to have lower power consumption and heat in the on-state.

3.     Low grid charge：The device has a lower gate charge, which means less energy is required during switching operation, improving overall efficiency.

4.     Low operating voltage：The device can operate at gate voltages as low as -4.5V, which gives designers more flexibility and convenience.

3, ChipSourceTek-MXD60P110 application

    The ChipSourceTek-MXD60P110 is widely used in many fields due to its excellent electrical characteristics and reliability. Its main application areas include:

1.     Load switch：When used as a load switch, the ChipSourceTek-MXD60P110 efficiently controls the connection and disconnection between the power supply and the load. Its high current carrying capacity and low on-resistance ensure high efficiency and reliability during switch operation.

2.     Power management：In a power management system, the ChipSourceTek-MXD60P110 can be used to regulate and distribute voltage to ensure a stable power supply for each subsystem.

3.     Motor drive：In motor drive applications, the ChipSourceTek-MXD60P110 provides efficient current control to ensure stable motor operation under a variety of operating conditions.

4.     Other applications：In addition to the above applications, the ChipSourceTek-MXD60P110 can also be used in other electronic devices that require high performance and high reliability, such as audio amplifiers and communication devices。

4, ChipSourceTek-MXD60P110 test circuit and switching waveform

    To verify the performance of the ChipSourceTek-MXD60P110, a series of tests are typically performed, including EAS test circuits, gate charge test circuits, and switching time test circuits.

1.     EAS test circuit：EAS (Electrostatic Aircraft Safe) test circuit is used to evaluate the electrostatic discharge immunity of equipment. Through this test, it is possible to ensure that the equipment can still work properly when it is subjected to electrostatic discharge.

2.     Grid charge test circuit：A grid charge test circuit is used to measure the total grid charge required by a device during switching operation. This parameter is crucial for evaluating the switching speed and energy consumption of the device.

3.     Switch time test circuit：The switch time test circuit is used to measure the on and off time of the device. The fast switching speed helps improve the overall efficiency and response speed of the equipment.

    The test and evaluation of ChipSourceTek-MXD60P110 can ensure its reliability and stability in practical applications.

    ChipSourceTek-MXD60P110 is a high-performance P-channel enhanced power Mosfet with wide application prospects. Its excellent electrical properties, reliable packaging and diverse application areas make it an ideal choice for electronics designers when developing high-performance, high-reliability electronic products. Whether in the field of load switching, power management or motor drive, the ChipSourceTek-MXD60P110 has demonstrated its unique advantages and potential.